Ask which layer needs attention
A broken tile, a flashing problem, and damaged underlayment do not describe the same repair. Ask which finding supports the recommendation and whether the area beneath the tile was examined. An exterior photograph alone cannot show every concealed part of the assembly.
Underlayment and flashing work together beneath the tile covering. The Tile Roofing Industry Alliance publishes guidance for the details around penetrations and for the flow of water through the roof system. Ask how the proposed repair addresses those connections, rather than focusing only on the replacement sheet material.
What a lift-and-reset proposal should explain
A lift-and-reset approach removes tile to access the layers below, then returns suitable tiles after the specified work. The term alone does not tell you how much area will be opened, which wood or metal components will be addressed, or which tiles can be reused.
Ask for the roof sections to be marked or described. A local repair needs a clear connection to the surrounding assembly. A wider underlayment project needs a plan for handling tile, exposed roof areas, and any damaged decking found after removal.
- Area of tile removal and the underlayment product proposed
- Deck inspection and separate wood repair terms
- Flashing, valleys, roof edges, and penetration details
- Tile storage, reuse criteria, breakage, and replacement pieces
- Permit responsibility and the records provided at completion
Reusing tile takes more than a color match
Ask whether the existing tile profile is identifiable and whether matching replacement pieces are available. Older profiles may be discontinued. The proposal should explain what happens if reusable tile is insufficient, including how any visible differences would be discussed before work proceeds.
A promise to save every tile deserves a question about damaged pieces and handling. Ask how breakage is counted and priced. Keeping sound material can be a useful option, but the decision should follow the tile's condition and the requirements of the rebuilt assembly.
Compare the full assembly
Ask why the selected underlayment suits the roof slope, tile system, and local requirements. Product names matter because installation instructions and permitted uses differ. A thicker-sounding product name does not explain how laps, edges, fasteners, or flashing will be detailed.
Discuss the difference between a defined repair and work across a larger section. Ask what remains untouched under each option and what uncertainty remains. You need the limits of the proposal as well as the list of new materials.
Start with the roof's history
Tell Elevate Roofing Co. where the issue appears, what previous repairs were made, and whether you have spare matching tiles. Call (747) 325-5484 to discuss tile roofing work for your Wilmington or Harbor-area property. Share existing photos and records; leave roof access and tile lifting to the person inspecting the assembly.
Your questions, answered.
Can old roof tiles be reused with new underlayment?
Suitable tiles may be reusable. Their condition, profile, available replacements, and the installation requirements need to be checked. Ask for the reuse and breakage terms in the written scope.
Does a tile roof leak always mean the underlayment has failed?
No. The cause could involve tile, flashing, underlayment, or another detail. The recommendation should follow an inspection and identify the evidence for the proposed work.
Can underlayment be replaced in one roof section?
That depends on the defect, the surrounding assembly, and whether the work can connect correctly to the existing roof. Ask why the proposed section boundary is appropriate and what remains outside it.